UF D5000 Fixed Clamp-on Flow Meter

UF D5000 Fixed Clamp-on Flow Meter

Fixed non-invasive, clamp-on, measurement solution for dirty water applications

Description

  • For “dirty” liquid monitoring
  • To suit pipes 13mm-4500mm
  • Non-invasive sensing
  • Easy to use
  • Watertight enclosure
  • RFI rejection Filters
  • Signal strength Indicator
  • Backflow protection

Description

  • For “dirty” liquid monitoring
  • To suit pipes 13mm-4500mm
  • Non-invasive sensing
  • Easy to use
  • Watertight enclosure
  • RFI rejection Filters
  • Signal strength Indicator
  • Backflow protection
Brochures:
Manuals:
There are no case studies available for this product

Technical Information

Pipe Range:– >13mm up to 4.5m
Power Input:– 100–240VAC, 50/60Hz, 3watts max
Flow Rate Range:– -12.2m/s to 12m/s in most applications
Accuracy:– +/-2% of full scale. Requires solids or bubbles of minimum size 100 microns, minimum concentration 75ppm
Repeatability:– +/- 0.1%
Linearity:– +/-0.5% of full scale
Display:– White, backlit matrix – displays flow rate, totalizer, relay states, operating mode and calibration menu
Output:– Isolated/4–20mA (1000ohm load max.) 5amp rated SPDT relays, programmable flow alarms and/or proportional pulse. Adjustable sensitivity and damping
Electronics Operating Temp:– -23°C to +60°C
Sensor Operating Temp:– -40° to +93°C (-40° to 200°F)
Options:– 9-32VDC. SE3H High Temperature model rated up to 150°C, ISE Insertion type for special applications.  Enclosure Heater for outdoor installation, 16watt thermostatically control to -40°C
Data Logger:– Built-in 2 million point logger with USB output and Windows software.

Request A Quote