Clamp-on flow and temperature sensors
Rate and totalised heat/energy demand
LCD with backlight
Click hereto request a quote.
|Measurement Technique: Transit time and PT100 Class B 4 wire
Turn Down Ratio: 200:01
Heat Meter Standard: The Heat/Energy calculation is designed to comply with EN1434 section 6.
Accuracy:+/-1-3% of flow reading for >0.3m/s
Flow Velocity Range: 0.1 to 10m/s
Pipe Range: 25mm – 115mm OD
Water Temp Range: 0°C to 85°C
Temperature sensors: Clamp-on PT100 Class B 4 wire, range 0 to 85°C, resolution 0.1 °C
Output: KWh energy or volume flow pulse
External Power Supply: 12V-24V +/- 10% AC/DC at 7 watts
Electronics Enclosure: IP54
Input/Output Cable: 5m x 6 core for power in and data out
Dimensions: 250mm x 48mm x 90mm (electronics + guide rail)
Modbus Communication:Modbus RTU slave, RS485 serial link hardware layer.