Best Value Flow Meter Solutions for Manufacturing and Process Flow Measurements

Liquid flow measurement in Process industry applications can present varied and challenging requirements and Micronics has had 35 years of experience in providing cost-effective and reliable flow meter solutions for applications in various industries including Nuclear Power, Dairy, Food Processing and the Semi-conductor industry.

Request A Callback

Please fill in the form below and someone will get in touch with you to answer your questions.

  • This field is for validation purposes and should be left unchanged.

There are many process liquid flows, which require a non-invasive measurement: to avoid contamination of the liquid, because of the corrosive nature of the liquid or to make ongoing servicing and maintenance easier, where this presents a challenge due to the location or critical nature of the process. In full pipe applications clamp-on, ultrasonic flow measurement is often the best solution.

Micronics is the longest established UK manufacturer in this technology with a wide range of portable instrument and fixed measurement, metering products backed up by previous application experience and technical support.  Micronics has the experience of providing flow measurement and monitoring solutions for Process applications including oils, paint and water solutions, acid, paper industry slurry and a wide range of both clean and dirty water applications for full, partial pipe and open channel flows. This includes products using Ultrasonic Doppler, Transit Time and the latest Microwave technology from its partner Dynamic Flow Technologies Ltd for waste water applications.

Read More
You may need to check the performance of an existing in-line meter or investigate process flows to find out “what’s flowing where”. Micronics can provide simple to use portable instruments and for full pipe applications the best solution may be clamp-on, non-invasive flow measurement from Micronics, yes that’s right clamp-on i.e. no need to drain down systems and cut into existing pipe-work! Micronics can supply or rent a simple to use portable instrument for the initial investigations i.e. to help you build a picture of what’s going on. And as a next stage they can provide fixed clamp-on solutions to provide the essential ongoing measurement and monitoring for effective management of the application.

However, we recognise that clamp-on is not the only solution and so in areas such as Waste Water monitoring and metering we can supply a cost effective in-line solution using an advanced range of Microwave products from our partner Dynamic Flow Technologies Ltd.

So if you need to measure or monitor process liquids, water or waste water flow in your industry we believe we have the solution and we would value the opportunity to discuss your requirements. Please take a look and if you have any questions or specific applications you’re considering we would be pleased to provide a FOC no obligation proposal and you may also benefit from our “Try before you buy” service.