New Portaflow 333 Portable Clamp-on Flow & Heat Meter

THE NEW PORTABLE RANGE OF CLAMP-ON FLOW AND ENERGY METERS
FROM MICRONICS, FOR SIMPLE, ACCURATE FLOW AND ENERGY MEASUREMENT
FROM OUTSIDE THE PIPE!

Our portable flow and energy meter solutions are ultrasonic, clamp on and non-invasive, for closed pipe applications. This means no interruption to process and no downtime whilst the portable flow and energy meters are installed. The Portaflow range brings simplicity to the non-invasive measurement of liquid flow and hydronic energy. Portaflow offers the user quick and accurate flow and energy measurement. And with its easy to follow menu and simple set up results can be achieved within minutes of opening the case!

Application/use: HVAC and energy system audits, Check system meters, Pump verification, Boiler testing, Leak detection, Filter sizing, Ultrapure water measurement, Heavy fuel oil metering, Condensate measurement, Balancing systems, Clean in place evaluation, Fire system testing, Hydraulic system testing

Description

 

  • New Ultrasonic, cross-correlation transit time method for flow measurement and PT100 Class B 4 wire for temperature measurement.
  • New Heat/Energy calculation is designed to comply with EN1434 section 6.
  • Flow Range – 0.1m/sec to 10m/sec bi-directional
  • Display – 64 x 240 pixels graphic display
  • Set-up via 16 key control panel
  • ‘A’ Transducers in mounting rail:– 13mm OD to 115mm OD pipes
  • ‘B’ Transducers in mounting rail:– 50mm OD to 2000mm OD pipes.
  • Battery or mains operation
  • Rechargeable NiMH battery
  • Battery Life – 14 hours (2.5 hours charge time), depending on load
  • Power – 110 – 240VAC +/-10% supply via PSU
  • 6 user selectable languages including English, German, French, Spanish, Portuguese and Russian
  • Accuracy Pipe ID > 75mm – ±0.5% to ±2% of flow reading for flow rate >0.2m/s
  • Accuracy Pipe ID 13-75mm – ±3% of flow reading for flow rate >0.2m/s
  • CE approved

Description

 

  • New Ultrasonic, cross-correlation transit time method for flow measurement and PT100 Class B 4 wire for temperature measurement.
  • New Heat/Energy calculation is designed to comply with EN1434 section 6.
  • Flow Range – 0.1m/sec to 10m/sec bi-directional
  • Display – 64 x 240 pixels graphic display
  • Set-up via 16 key control panel
  • ‘A’ Transducers in mounting rail:– 13mm OD to 115mm OD pipes
  • ‘B’ Transducers in mounting rail:– 50mm OD to 2000mm OD pipes.
  • Battery or mains operation
  • Rechargeable NiMH battery
  • Battery Life – 14 hours (2.5 hours charge time), depending on load
  • Power – 110 – 240VAC +/-10% supply via PSU
  • 6 user selectable languages including English, German, French, Spanish, Portuguese and Russian
  • Accuracy Pipe ID > 75mm – ±0.5% to ±2% of flow reading for flow rate >0.2m/s
  • Accuracy Pipe ID 13-75mm – ±3% of flow reading for flow rate >0.2m/s
  • CE approved
Request a Quote

Brochures

User Manuals

  • Portaflow 333 Manual

Technical Information

Transducer Operating Temp:– ‘A’&‘B’ -20°C to +135°C. Optional Hi-Temp -20°C to +200°C.
Outputs:– Pulse or Frequency. Opto Isolated MOSFET relay. 4-20mA flow proportional output, optically isolated 1500 volts 620 ohms maximum load.
Data Logging:– 100,000,000 data points. 12 named sites. Download via USB to CSV file and export to Excel.

Request A Quote

  • This field is for validation purposes and should be left unchanged.