U1000MKII-FM Fixed Clamp-on, Ultrasonic Flow Meter
The New ULTRAFLO U1000MKII-FM is a Fixed, clamp-on, pipe mounted, ultrasonic flow meter, which delivers significant installation savings and non-invasive, dry servicing benefits for pipe sizes ranging from 22mm – 180mm (6″) OD.
Description
Key Features & Benefits:
New: larger pipe range 2 options, fully adjustable for 22mm – 115mm and 125mm – 180mm (6″) OD
New: Optional Modbus RTU slave, RS485 serial and M-Bus communication
New: cross correlation flow measurement system
New: 1Mhz transducers to get through poor/old thick wall pipes and larger pipework
New: Water/Glycol option
Simple to install: connect power and enter the pipe inside diameter, adjust the sensors and clamp-on the pipe, no specialist skills or tools required
A clamp-on non-invasive alternative to traditional in-line meter installation, plus dry servicing, providing minimum downtime and maximum availability.
LCD with backlight – install & service information.
Integrated pulse and optional 4-20mA output – aM&T & BEM’s compatible with Modbus.
New: larger pipe range 2 options, fully adjustable for 22mm – 115mm and 125mm – 180mm (6″) OD
New: Optional Modbus RTU slave, RS485 serial and M-Bus communication
New: cross correlation flow measurement system
New: 1Mhz transducers to get through poor/old thick wall pipes and larger pipework
New: Water/Glycol option
Simple to install: connect power and enter the pipe inside diameter, adjust the sensors and clamp-on the pipe, no specialist skills or tools required
A clamp-on non-invasive alternative to traditional in-line meter installation, plus dry servicing, providing minimum downtime and maximum availability.
LCD with backlight – install & service information.
Integrated pulse and optional 4-20mA output – aM&T & BEM’s compatible with Modbus.
Measurement Technique: Utrasonic, cross-correlation transit time method for flow measurement. Turn Down Ratio: 100:1 Accuracy: ±1% – 3% of flow reading for >0.3m/s (>1ft/s). Flow Velocity Range: 0.1m/s – 10m/s (0.3ft/s – 32ft/s), Pipe Range: Available in 2 options. 22mm – 115mm and 125mm – 180mm OD. Note Pipe size dependent on pipe material and internal diameter. Pipe Material: Steel, Stainless Steel, Plastic and Copper Water Temp Range: 0°C – 85°C (32°F – 185°F). Pulse Output: Pulse or Frequency. Pulse for volume flow and alarms. Frequency for flow rate. The pulse output can be configured as loss of signal or low flow alarm. Opto-isolated MOSFET volt free contact [NO/NC]. 4-20mA Output: Optional 4-20mA flow proportional output. Resolution 0.1% of full scale. Maximum load 620Ω. Modbus Communication: Pipe Mounted:- Optional Modbus RTU slave, RS485 serial link hardware layer. Connection cable 1M. M-Bus Communication: Optional M-Bus External Power Supply: 12V-24V ±10% AC/DC at 7 watts. Optional plug in 12V power supply Electronics Enclosure: IP54. Input/Output Cable: 5m x 6 core for power in, 4-20mA and pulse output. Dimensions: 250mm x 48mm x 90mm [10″ x 2″ x 4″] {electronics + guide rail).
